G-Paint Ping G Le2 Burgundy Touch-Up Paint (10ml)
G-Paint Ping G Le2 Burgundy Touch-Up Paint (10ml)
Couldn't load pickup availability
Ping G Le2 Burgundy Touch-Up Paint, Color-Matched for Ping
Driver and fairway wood crowns pick up sky marks, chips and bag chatter. G-Paint Ping G Le2 Burgundy touch-up paint is color-matched for Ping G Le2 (burgundy) clubs, so you can repair the damage and keep your club looking its best. Each 10ml bottle has a precision nib and needs no primer or lacquer.
What It's For
The burgundy crown and body paint on Ping G Le2 drivers, woods and hybrids.
Key Features
- Color-matched to Ping G Le2 Burgundy so repairs blend in with the original paint
- One-step repair: no primer and no lacquer required
- Precision nib applicator for chips, stampings and fine graphics
- Two paint agitators in each bottle for an even, consistent color
- Fast drying: touch dry in 30 minutes, fully hardened in 24 hours
- Child-resistant safety cap and easy step-by-step instructions on the pack
How to Apply G-Paint Ping G Le2 Burgundy
- Confirm your color. Check your original invoice or the manufacturer's website to make sure this is the right shade for your club.
- Shake for at least 60 seconds. Pigments settle over time, and two agitators inside the bottle remix the paint to the matched shade.
- Clean the area. Wash with warm soapy water and dry completely so the paint bonds to a clean surface.
- Apply a thin coat. Use the precision nib to work paint into the chip, stamping or graphic. No primer or lacquer is needed.
- Let it set. Touch dry in 30 minutes. Allow 24 hours to fully harden before you play.
Watch: G-Paint How-To Video
Want a full walkthrough? Read our step-by-step guide, How to Paint Fill Golf Clubs.
Specifications
| Brand | G-Paint (developed in the UK) |
|---|---|
| Color | Ping G Le2 Burgundy |
| Made for | The burgundy crown and body paint on Ping G Le2 drivers, woods and hybrids |
| Volume | 10ml bottle |
| Applicator | Precision nib |
| Primer / Lacquer | Not required |
| Dry Time | Touch dry in 30 minutes |
| Full Hardness | 24 hours |
| Safety | Child-resistant closure |
G-Paint Ping G Le2 Burgundy FAQs
Will G-Paint Ping G Le2 Burgundy match my club exactly?
G-Paint matches each color to the manufacturer's original finish. Older clubs can fade or weather over time, so a repair on a well-used club may look slightly different from the paint around it.
Do I need primer or a clear coat?
No. G-Paint is a one-step paint. Apply it directly to the clean area and let it harden. No primer or lacquer is required.
How long before I can use the club?
The paint is touch dry in 30 minutes. Wait 24 hours for it to fully harden before you play or put a headcover on.
How much will one bottle repair?
Touch-ups and paint fills only need a small amount of paint, so a 10ml bottle goes a long way.
More G-Paint Ping Colors
Restore the look of your club today. Add G-Paint Ping G Le2 Burgundy to your cart.
