G-Paint TaylorMade Spider X Copper Touch-Up Paint (10ml)
G-Paint TaylorMade Spider X Copper Touch-Up Paint (10ml)
Couldn't load pickup availability
TaylorMade Spider X Copper Touch-Up Paint, Color-Matched for TaylorMade
Chips, scuffs and worn sightlines make a good putter look tired. G-Paint TaylorMade Spider X Copper touch-up paint is a 10ml paint color-matched to TaylorMade, so repairs blend in with the original finish. It goes on with a precision nib and needs no primer or lacquer.
What It's For
Chips and worn copper paint on TaylorMade Spider X Copper putters.
Key Features
- Color-matched to TaylorMade Spider X Copper so repairs blend in with the original paint
- One-step repair: no primer and no lacquer required
- Precision nib applicator for chips, stampings and fine graphics
- Two paint agitators in each bottle for an even, consistent color
- Fast drying: touch dry in 30 minutes, fully hardened in 24 hours
- Child-resistant safety cap and easy step-by-step instructions on the pack
How to Apply G-Paint TaylorMade Spider X Copper
- Confirm your color. Check your original invoice or the manufacturer's website to make sure this is the right shade for your club.
- Shake for at least 60 seconds. Pigments settle over time, and two agitators inside the bottle remix the paint to the matched shade.
- Clean the area. Wash with warm soapy water and dry completely so the paint bonds to a clean surface.
- Apply a thin coat. Use the precision nib to work paint into the chip, stamping or graphic. No primer or lacquer is needed.
- Let it set. Touch dry in 30 minutes. Allow 24 hours to fully harden before you play.
Watch: G-Paint How-To Video
Want a full walkthrough? Read our step-by-step guide, How to Paint Fill Golf Clubs.
Specifications
| Brand | G-Paint (developed in the UK) |
|---|---|
| Color | TaylorMade Spider X Copper |
| Made for | Chips and worn copper paint on TaylorMade Spider X Copper putters |
| Volume | 10ml bottle |
| Applicator | Precision nib |
| Primer / Lacquer | Not required |
| Dry Time | Touch dry in 30 minutes |
| Full Hardness | 24 hours |
| Safety | Child-resistant closure |
G-Paint TaylorMade Spider X Copper FAQs
Will G-Paint TaylorMade Spider X Copper match my club exactly?
G-Paint matches each color to the manufacturer's original finish. Older clubs can fade or weather over time, so a repair on a well-used club may look slightly different from the paint around it.
Do I need primer or a clear coat?
No. G-Paint is a one-step paint. Apply it directly to the clean area and let it harden. No primer or lacquer is required.
How long before I can use the club?
The paint is touch dry in 30 minutes. Wait 24 hours for it to fully harden before you play or put a headcover on.
How much will one bottle repair?
Touch-ups and paint fills only need a small amount of paint, so a 10ml bottle goes a long way.
More G-Paint TaylorMade Colors
Spider Tour Red | Spider X Navy Blue Matte | SIM2 White | SIM2 White | M1 / M2 White | Stealth Black | AeroBurner White
Restore the look of your putter today. Add G-Paint TaylorMade Spider X Copper to your cart.
