G-Paint White Golf Club Paint Fill - 10ml Bottle
G-Paint White Golf Club Paint Fill - 10ml Bottle
Couldn't load pickup availability
White Paint Fill for Golf Clubs
Make your numbers, logos and sight lines easy to see again. G-Paint White golf club paint fill is a 10ml bottle of tough, permanent infill paint for irons, wedges, putters, drivers, woods and hybrids. Use it to refresh worn paint, add a custom color or brighten alignment aids. You don't need any special skill.
Key Features
- Chip, shock and chemical resistant for a durable, long-lasting finish
- Single coat: apply over existing paint or onto bare metal with no primer
- Fine nib applicator works like a filler pen for precise results
- Touch dry in 30 minutes, fully cured in 6 hours
- Mix with other G-Paint colors to create your own custom shades
- Child-proof safety cap
Where to Use It
- Iron and wedge numbers, lofts and logos
- Putter sight lines, dots and stampings
- Groove alignment lines on wedges and irons
- Driver, wood and hybrid graphics
How to Paint Fill in 4 Steps
- Clean. Wash the club with warm soapy water and dry it thoroughly.
- Apply. Shake well, then use the fine nib to fill the engraving, number or sight line. Go over existing paint or bare metal.
- Wipe. Remove excess paint from the surface with a cloth before it dries, leaving paint only in the recess.
- Wait. Touch dry in 30 minutes and fully cured in 6 hours.
Watch: G-Paint How-To Videos
For tips and photos, read How to Paint Fill Golf Clubs: Step-by-Step Putter and Iron Restoration.
Specifications
| Brand | G-Paint (developed in the UK) |
|---|---|
| Color | White |
| Volume | 10ml bottle |
| Use On | Numbers, letters, logos, stamping, sight lines and groove alignment lines |
| Clubs | Irons, wedges, putters, drivers, woods and hybrids |
| Applicator | Fine nib |
| Primer | Not required |
| Dry / Cure | Touch dry 30 minutes / fully cured 6 hours |
| Note | Infill paint, not suitable as a base coat |
G-Paint White FAQs
Can I use G-Paint on bare metal?
Yes. Apply one coat onto bare metal or over existing paintwork. No primer is needed.
How do I get a clean line?
Overfill the engraving slightly, then wipe across the surface with a cloth before the paint dries. The paint stays in the recess and the surface wipes clean.
Can I paint a whole club head with it?
No. G-Paint infill is made for engravings, stampings and graphics. It is not suitable as a base coat.
Can I mix White with other colors?
Yes. All G-Paint colors can be mixed to create your own custom shades.
Build Your Color Kit
Single bottles: Black | Pink | Red | Orange | Yellow | Green | Blue
Save with a kit: 8 Pack (all colors) | 4 Pack: Black, White, Red, Blue | 4 Pack: Yellow, Pink, Orange, Green
Give your clubs a custom look. Add G-Paint White to your cart.
